PRODUCTS

Spindle with integrated Inverter, available in all models with spindle shafts or equipped for ER collets with maximum 24,000 RPM and 1.5 Kw. This series of spindles has its own Frequency Inverter built ONTO the spindle housing. This is a very economical application you only need a single 230 V 50/60 Hz single phase Input source. Speeds are controlled by a surface mountedpotentiometer. No longer is there a need for a separate Inverter to operate the spindle. Installation is made simple and costs are reduced. we are planning to widen our series to reach the 3 Kw and the feeding will be three-phase 230 or 400 v 50/60 Hz.

PE Series

TYPE	VOLTAGE [Volt]	FREQUENCY [Hz]	RPM	DELIVERED POWER [Kw]	ABSORPTION. [Amp]	Cos j	WEIGHT [Kg]
PE0 6/2	220	100	6000	0,05	0,77	0,68	1,5
PE0 6/2	220	200	12000	0,15	2,30	0,68	1,5
PE0 6/2	220	300	18000	0,30	4,60	0,68	1,5
PE0 8/2	220	100	6000	0,07	1,10	0,68	1,8
PE0 8/2	220	200	12000	0,18	2,80	0,68	1,8
PE0 8/2	220	300	18000	0,35	5,40	0,68	1,8
PE1 6/2	220	100	6000	0,07	1,20	0,54	2,5
PE1 6/2	220	200	12000	0,16	2,80	0,54	2,5
PE1 6/2	220	300	18000	0,22	3,80	0,54	2,5
PE1 7/2	220	100	6000	0,10	1,70	0,54	2,8
PE1 7/2	220	200	12000	0,22	3,80	0,54	2,8
PE1 7/2	220	300	18000	0,33	5,70	0,54	2,8
PE1 8.5/2	220	100	6000	0,22	3,80	0,56	3,1
PE1 8.5/2	220	200	12000	0,37	6,40	0,56	3,1
PE1 8.5/2	220	300	18000	0,55	9,50	0,56	3,1
PE2 9/2	220	50	3000	0,10	1,50	0,68	3,5
PE2 9/2	220	100	6000	0,22	3,30	0,68	3,5
PE2 9/2	220	200	12000	0,55	8,20	0,68	3,5
PE2 9/2	220	300	18000	0,75	10,80	0,68	3,5
PE3 7/2	220	50	3000	0,15	2,70	0,58	3,7
PE3 7/2	220	100	6000	0,30	5,40	0,58	3,7
PE3 7/2	220	200	12000	0,60	10,80	0,58	3,7
PE3 7/2	220	300	18000	0,85	15,40	0,58	3,7
PE3 9/2	220	50	3000	0,20	3,40	0,57	4,8
PE3 9/2	220	100	6000	0,45	7,90	0,57	4,8
PE3 9/2	220	200	12000	0,75	14,10	0,57	4,8
PE3 9/2	220	300	18000	1,00	17,70	0,57	4,8
PE3 12/2	220	50	3000	0,30	5,40	0,56	6,5
PE3 12/2	220	100	6000	0,75	13,30	0,56	6,5
PE3 12/2	220	200	12000	1,50	26,80	0,56	6,5
PE3 12/2	220	300	18000	1,50	26,90	0,56	6,5
PE3 14/2	220	50	3000	0,45	8,10	0,54	7,5
PE3 14/2	220	100	6000	0,95	16,80	0,54	7,5
PE3 14/2	220	200	12000	1,50	24,90	0,54	7,5
PE3 14/2	220	300	18000	1,50	25,10	0,54	7,5
PE4 10/2	220	50	3000	0,65	10,10	0,58	9,0
PE4 10/2	220	100	6000	1,10	17,10	0,58	9,0
PE4 10/2	220	200	12000	1,50	19,90	0,58	9,0
PE4 11/2	220	50	3000	0,75	11,30	0,60	9,8
PE4 11/2	220	100	6000	1,50	22,60	0,60	9,8
PE4 13/2	220	50	3000	1,00	14,80	0,61	11,2
PE4 13/2	220	100	6000	1,50	22,20	0,61	11,2
PE4 14/2	220	50	3000	1,10	16,00	0,62	12,0
PE4 14/2	220	100	6000	1,50	21,80	0,62	12,0

TMPE Series

TYPE	VOLTAGE [Volt]	FREQUENCY [Hz]	RPM	DELIVERED POWER [Kw]	ABSORPTION. [Amp]	Cos j	WEIGHT [Kg]
TMPE0 6/2	220	100	6000	0,05	0,77	0,68	1,5
TMPE0 6/2	220	200	12000	0,15	2,30	0,68	1,5
TMPE0 6/2	220	300	18000	0,30	4,60	0,68	1,5
TMPE0 6/2	220	400	24000	0,35	5,40	0,68	1,5
TMPE0 8/2	220	100	6000	0,07	1,10	0,68	1,8
TMPE0 8/2	220	200	12000	0,18	2,80	0,68	1,8
TMPE0 8/2	220	300	18000	0,35	5,40	0,68	1,8
TMPE0 8/2	220	400	24000	0,40	6,30	0,68	1,8
TMPE1 6.5/2	220	100	6000	0,10	2,40	0,45	3,1
TMPE1 6.5/2	220	200	12000	0,22	5,20	0,45	3,1
TMPE1 6.5/2	220	300	18000	0,33	8,00	0,45	3,1
TMPE1 6.5/2	220	400	24000	0,40	9,70	0,45	3,1
TMPE2 9/2	220	50	3000	0,10	1,50	0,68	3,5
TMPE2 9/2	220	100	6000	0,22	3,30	0,68	3,5
TMPE2 9/2	220	200	12000	0,55	8,20	0,68	3,5
TMPE2 9/2	220	300	18000	0,75	10,80	0,68	3,5
TMPE2 9/2	220	400	24000	0,75	10,80	0,68	3,5
TMPE3 9/2	220	50	3000	0,20	3,40	0,57	4,8
TMPE3 9/2	220	100	6000	0,45	7,90	0,57	4,8
TMPE3 9/2	220	200	12000	0,75	14,10	0,57	4,8
TMPE3 9/2	220	300	18000	1,00	17,70	0,57	4,8
TMPE3 12/2	220	50	3000	0,30	5,40	0,56	6,5
TMPE3 12/2	220	100	6000	0,75	13,30	0,56	6,5
TMPE3 12/2	220	200	12000	1,50	26,80	0,56	6,5
TMPE3 12/2	220	300	18000	1,50	26,90	0,56	6,5
TMPE4 10/2	220	50	3000	0,65	10,10	0,58	9,0
TMPE4 10/2	220	100	6000	1,10	17,10	0,58	9,0
TMPE4 14/2	220	50	3000	1,10	16,00	0,62	12,0
TMPE4 14/2	220	100	6000	1,50	21,90	0,62	12,0

TMPE0 8/2

STK Series

TYPE	VOLTAGE [Volt]	FREQUENCY [Hz]	RPM	DELIVERED POWER [Kw]	ABSORPTION. [Amp]	Cos j	WEIGHT [Kg]
STK21 6.5/2	220	100	6000	0,10	2,40	0,45	1,8
STK21 6.5/2	220	200	12000	0,22	5,20	0,45	1,8
STK21 6.5/2	220	300	18000	0,33	8,00	0,45	1,8
STK21 9/2	220	50	3000	0,10	1,50	0,68	2,0
STK21 9/2	220	100	6000	0,22	3,30	0,68	2,0
STK21 9/2	220	200	12000	0,55	8,20	0,68	2,0
STK21 9/2	220	300	18000	0,75	10,80	0,68	2,0

- Single phase input230V (+/-20%) frequency 45-65Hz
- Speed regulation by means of a potentiometer
- Voltage and output frequency are already set
- Checkout of the presence of the inverter feeding
- Checkout of the output phases (missing phase, high absorption)
- Over temperature protection
- Reversal of the direction of rotation by means of a jumper
- output frequency from 40 to 400 Hz
- max power available 1,5 Kw
Optional card with the following functionalities:
- Speed control with insulated analog signal 0/+10V
- Reverse control with insulated signal
- Start/stop control with insulated signal
- Optoinsulated exit called drive-ok to signal defect inverter
- Optoinsulated exit to signal reached frequency

We are at your disposal to value further requests and possible modifications based on customer's specifications.
Important. It is possible to carry out this new brand of electric spindles with incorporated inverter on all our series with max power 1.5 Kw and frequency variable from 50 to 400 Hz.
We are working on the same project also for higher power.